China wholesale merchandise blue over spray epoxy resin powder
coating
Epoxy powder coating is a series of epoxy based powder coating designed to give optimum
mechanical properties and exceptional protective qualities on
components and fabrications where long term exposure to ultra
violet light or exterior weathering is not anticipated
Typical applications are on lab furniture, water/well pumps,
certain engine components, children’s' toys, certain electrical
components.
Application Areas:
· Water Pipes, oil pipes under earth
· Reinforced rebars
· Electrically insulating parts
CURING CONDITIONS
180 °C ~ 200 °C (work piece temperature), 10-15 minutes
AVERAGE COVERAGE
8-12 square meters / kg, thickness 60 microns (100% of the powder
coating utilization rate)
Gloss&Texture&Color
l Supper Matt(<10%), Matt(<30%)
l Usually smooth
l RAL color, Pantone colorsfull color range is available
PHYSICAL PROPERTIES
l Specific gravity :1.2 ~ 1.8g/cm3 up to colors
l Particle size distribution:100% less than 100 microns (depending
on the specific indicators art effects may be, according to the
special requirements of painting adjusted)
l Level of liquidity:24 ~ 27 mm
GENERAL TYPES
· Polyester powder coating
· Epoxy Polyester Powder coating
· Acrylic Powder Coating
· Polyurethane powder coating
PACKING
Outside carton lined with two layers of polyethylene bags, each
containing 20 kg net weight.
STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near
the fire source, heating, avoid direct sunlight, the product in the
transport should be to prevent rain, sun, prolonged sun
exposure.Storage products in line with the above conditions, since
the date of production, effective storage period is 6 months.Over
the storage period may be re-tested and the results were consistent
with, can still be used.
HEALTH AND SAFETY
Coating powder is a non-toxic products, but should be avoided in
the course of inhalation of dust.Proposed operators wear
appropriate dust mask, glasses.If possible, try to avoid long-term
skin contact with powder coating
Purchase Note:
1.M.O.Q :
The minimum order is 500kg ,each color ≥ 100kg
2.Colors:
RAL color :we usually use RAL colors that is widely used in paint
industry and easily find in market
Custom color : Color matching is available , if you have colors
model ,please send to us for matching .
3.Prices:
Prices depend on the colors and using environment ,for prices
please tell us the colors and using environment (indoor use or
outdoor use).
4.Time of delivery :
Production will take about 5-8 days after receipt of
prepayment,this is subject to the quantity .
5.Payment :
30% T/T prepayment , 70% T/T before shipment (or against BL) or LC
at sight .
6.Samples:
1kg powder sample is available for each color for your testing.
Sample is free of cost,but if you pay for the air freight we will
highly appreciate.
